Applications

Cables are high-flexible, control cables with an outer sheath of PVC. They are designed for use in power chains or moving machine parts, as well as for fixed installation subject to medium mechanical load conditions. The screen is a protection against electrical interference.

Design

• Conductor: Extra fine wire stranded bare copper, class 6 to EN 60228
• Insulation: PVC Type TI2 to EN 50 363-3
  Shore A: 88±3
• Core identification: LiFYYCY-JZ - Cables of 3 or more cores: black cores
  with white figures imprint and a green-yellow core as a protective conductor
  LiFYYCY-OZ - Cables of 2 or more cores: black cores
  with white figures imprint without a green-yellow core
• Construction: From cross section 0.50 mm² up to 6.00 mm²
• Assembly: Cores stranded in layers with or without the
  green-yellow core in the outer layer.
  The outer stranding layer shall be wrapped with fleece foil.
• Inner sheath: PVC Type TM2 to ЕN 50 363-4-1
  Shore Шор A: 77 ± 3
  Colour grey RAL 7001 or another by agreement
• Screen: Braided screening made of tinned copper wire,
  coverage approx. 85 ± 5 % or another by agreement.
  Wrapping over braid with fleece foil.
• Outer sheath: PVC Type TM2 to ЕN 50 363-4-1
  Shore A: 77 ± 3
  Colour grey RAL 7001 or another by agreement

Electrical data

• Rated voltage Uo/U: 300/500 V
• Test voltage on finished cable a.c., 50 Hz: 4000 V
• Specific insulation resistance at 20°C: > 20 МΩ.km

Operating conditions

• Minimum bending radius:

  Flexing installation:	7.5 x cable diameter
  Fixed installation:	4 x cable diameter

• Working temperature:

  Fixed installation:	-40°C ÷ +80°C
  Flexing installation:	-15°C ÷ +70°C

• Flame behaviour: according to EN 60 332-1-2
  CPR: Eca