Control flexible cables with pvc insulation and sheath
Applications
As control or connecting cables for control systems in machine tools, production and assembly lines, transporting plants, as well as measuring systems, under normal mechanical load conditions with rated voltage 300/500V.
Design
Conductor:Stranded bare copper wires, class 5 to EN 60228.
Insulation:
PVC Type TI2 to EN 50 363-3
Shore A: 88±3
Core identification:
LiYY-JB - Cables of 3 and to 5 cores: coloured cores
according to DIN VDE 0293-308 and a green-yellow core as a protective conductorк
LiYY-OB - Cables of 2 cores only: coloured cores
according to DIN VDE 0293-308 without a green-yellow core
Construction:From cross section 0.50 mm2 up to 2.50 mm2
Assembly:Cores stranded in layers with or without the green-yellow core in the outer layer.
Outer sheath:
PVC Typeт TM2 to ЕN 50 363-4-1
Shore A: 77 ± 3
Colour grey RAL 7001 or another by agreement
Electrical data
Rated voltage Uo/U:300/500 V
Test voltage on finished cable a.c., 50 Hz:4000 V
Specific insulation resistance at 20°C: > 20 МΩ.km
Operating conditions
Minimum bending radius:
Flexing installation:
10 x cable diameter
Fixed installation:
4 x cable diameter
Working temperature:
Fixed installation:
-40°C ÷ +80°C
Flexing installation:
-15°C ÷ +70°C
Flame behavior: according to EN 60 332-1-2
CPR: Eca
Cable constructional data
Number and nominal cross sectionl of conductors
[mm2]
Overall diameter of cable [mm]
2 X 0.50
4.70 ± 0.30
3 X 0.50
5.00 ± 0.30
4 X 0.50
5.60 ± 0.30
5 X 0.50
6.10 ± 0.30
2 X 0.75
5.10 ± 0.30
3 X 0.75
5.60 ± 0.30
4 X 0.75
6.10 ± 0.30
5 X 0.75
6.90 ± 0.30
2 X 1.00
5.60 ± 0.30
3 X 1.00
5.90 ± 0.30
4 X 1.00
6.40 ± 0.30
5 X 1.00
7.30 ± 0.30
2 X 1.50
6.20 ± 0.30
3 X 1.50
6.80 ± 0.30
4 X 1.50
7.40 ± 0.30
5 X 1.50
8.10 ± 0.30
2 X 2.50
7.60 ± 0.30
3 X 2.50
8.30 ± 0.30
4 X 2.50
9.00 ± 0.30
5 X 2.50
10.10 ± 0.40
Note: Cables with another number of conductors may be produced by agreement.
